Rear - Canon imagePROGRAF iPF825 Service Manual

1.5.2 Rear

[3]
[1] Ethernet connector
Insert an Ethernet cable into this connector. A lamp will turn on if the Ethernet cable is connected properly and the printer is ready to communicate.
[2] USB port
Insert a USB cable into this port. Hi-Speed USB-ready.
[3] Manual pocket
Have the printer manual stowed in this pocket.
[4] Power connector
Insert the power cord into this connector.
[5] Lower roll unit connector
Insert the lower roll unit cable into this connector.
[6] Carrying handle
The carrying handle is located on both left and right sides of the bottom. Allow a team of six persons to carry the printer.
[7] Accessory pocket
Have assembly tools, roller holder attachments and so on stowed in this pocket.
[2] [1]
[6]
[4]
[7]
[5]
F-1-16
Chapter 1
[6]
0025-9282
1-17