Assembling - Makita JR3051T Repair Manual

[1]
6-3-2

Assembling

[1]
[2]
[3]
[1]
Fig.12
[3]
[2]
Fig.13
[3]
[2]
Fig.14
[3]
[2]
9
When removing Torsion spring 17 [2] from Slider
[1], Compression spring 2 [3] is also come off.
Be careful not to drop or lose Compression spring 2
[3].
1
Hold the machine with 1R312 with the tip faced
upward.
2
Fit the short leg of Torsion spring 17 [1] into the
hole in Connecting sleeve [2], then assemble them
to Slider [3].
Note the orientation of Torsion spring 17 [1].
3
Assemble Compression spring 2 [2] and Push pin
[3] to Slider [1].
9 / 32
Note
Note