PK-00103679-1
TROUBLESHOOTING:
WHEN TO USE THE BULB ADAPTOR
Your Smart Switch package includes a Bulb Adaptor
that may be required when using your switch with
some bulb types (C by GE smart
bulbs
and LED
non-dimmable
bulbs).
If your C by GE Smart Switch experiences the following
issues after installation:
• Switch will not power on or control the bulb
• Flickering
• Poor dimming performance
Check that all installation and wiring
steps
were followed.
If still experiencing issues, install the Bulb Adaptor into a
light socket and then screw your light bulb into the bulb
adaptor.
See
installation
guide for recommended use.
If the Bulb Adaptor does not fit with your existing light
application, please contact
C
by GE support by going to
cbyge.com
or calling
l-844-30C-BYGE
for additional
troubleshooting help. Go to
cbyge.com/switch-support
for
more information and helpful
tips.