Advertisement
STEP 2
Remove Your
Old Switch
1. Remove the existing wall plate and switch from the wall.
2. Use voltage tester on the black wires to confirm power to the
switch is off (recommended).
3. Before disconnecting the wires from the wall, label each with
the provided wire labels.
A
Ground wire is required. If you don't have this wire, the C by GE
switch is not compatible.
'4. Disconnect wires and remove existing switch.
12
For Help, Go To: cbyge.com/swltch-support or call 1-8.C..C.-30C-BYGE
Advertisement
