STEP 3
Connect
The Wires
NOTE: Both black wires on the
switch are interchangeable and
can be connected to either the
load or line wire from the wall.
1. Connect the first line/load (black)
wire on the switch to the line or load
{black label) wire from the wall.
2. Connect the second line/load (black)
wire on the switch to the line or load
(black label) wire from the wall.
3.
Connect the ground
@
(green) wire
on the switch with the ground (green
label) wire from the
wall.
It. Cap the 3-way/multi-way traveler wire
(if applicable).
For 3-way switch
setup,
visit cbyge.
com/switch-support
A
Attention:
Incorrectly connecting
the Ground wire from the wall to
the Ground wire on the switch
will damage
the product.
5. Cap the
neutral
wire from the wall
(if applicable). Neutral wire is not
required to operate this switch.
lit
For Help, Go To: cbyge.com/swltch-support or call 1-8Ltlt-30C-BYGE