STEP 6
Turn The Power
Back On
Tip: To enable the full C by GE experience,
you'll
need
to set up all your C by GE products
in the C by GE app. If you've set up C by GE
bulbs in the Google Home app, visit
cbyge.com/support for unpairing instructions.
After the switch is secured and faceplate
mounted, turn the power back on at the
circuit breaker box.
The light ring will flash blue indicating the
device is wired correctly and the device
is in setup mode. Press any button on the
switch to enable setup mode
if
setup mode
times out.
ON
(■ •)oFF
-■ -■
-■ -■
-·
-■
-■ -■
-■ -■
-■ -■
20
For Help, Go To: cbyge.com/swltch-support or call 1-844-30C-BYGE