Kenwood TS-930S Instruction Manual page 6
Hide thumbs
Also See for TS-930S:
- Service manual (92 pages) ,
- Instruction manual (50 pages) ,
- Service manual (79 pages)
Table of Contents
Advertisement
large, heavy, flywheel-type knob is used for ease of tun-
ing. The T.F. Set switch allows fast transmit frequency
setting for split-frequency operations. An A=B switch
is provided for equalizing one VFO frequency to the
other. A VFO 'Lock'? switch is provided. The RIT
control allows +9.9 kHz receive frequency shift.
Automatic VFO Step change
Tuning
faster
than
5.5~6.5
revolutions/second
increases the tuning rate for easy OSY.
Eight Memory Channels
These
store
both
frequency
and
band.
VFO-MEMO
switch allows use of each memory as either an indepen-
dent VFO, (the originat memory frequency can be recall-
ed at will), or as a fixed frequency.
Internal battery
memory back-up, estimated 1 year life. (Three "AA"
batteries not Kenwood supplied).
Fluorescent Tube Digital Display
Six digit fluorescent tube digital display has an analog
type sub-scale with 20 kHz increment markers. A
separate 2 digit display always indicates RIT frequency
shift, The display also indicates VFO "A" or "B™,
Memory channel operation, RIT "ON
and VFO
"LOCK".
AC Power Supply Bulltin
120, 220, or 240 V AC, switch selected. {operates on
AC only}. Separate automatic fan provided to force-cool
the power supply.
'Other Features:
* SSB monitor circuit, 3 step RF attenuator, VOX, and
100 kHz marker
© 2.4 kHz SSB and 6 kHz AM filters built-in
*
Display and meter dimmer switch
Optional Equipment:
* AT-930
Automatic antenna tuner
© SP-930
External speaker with selectable audio
filters
* YG-455C-1
(500 Hz) or YG-455CN-1 (250 Hz} plug-
in 456 kHz CW filters
* YK-88C-1
(500 Hz} CW and/or YK-BBA-1 {6 kHz)
AM plug-in 8.83 MHz filters
* MC-60A
Deluxe desk microphone with PTT, PTT
lock, and UP/DOWN switches
© 71-922(A)
The linear amplifier TL-922A. (without
10m band) is available only in U.S.A.
* SM-220
Station monitor for transmit, receive, and
trapazoid displays
© PCIA
Hybrid phone patch
© HC-10
Digital World Clock
* HS-6, HS-5,
(Deluxe through standard) headphones
HS-4,
IMPORTANT
The MC-60A has a built-in amplifier. When using the
microphone connected to the ¥S$-930S, be sure to
set the MC-60A MIC AMP switch to OUT.
With the MIC AMP switch set to IN, the microphone
output level exceeds the rated input level of the
TS-9305.
Advertisement
Table of Contents
