Kenwood TS-930S Instruction Manual page 5

(oie
SECTION 2.
2.1 KENWOOD TS-930S
2.2 FEATURES
+ 160-10 Meters,
Coverage Receiver
with 150 kHz — 30 MHz General
* Excellent Receiver Dynamic Range
SSB IF Slope Tuning
Allows independent adjustment of the low and/or high
frequency slopes of the iF passband, for best
interference rejection.
CW VBT and Pitch Controls
The CW VBT (Variable Bandwidth Tuning) contro! tunes
out interfering signals. The CW pitch contro! shifts the
IF passband and simultaneously changes, both the
received beat frequency and sidetone pitch. A "Natrow/
Wide" filter selector switch is provided.
IF Notch Filter
Built-in Audio Filter
Tuneable, peak-type audio filter for CW. Peak center
frequency is approximately 800Hz, adjustable
+400 Hz.
All Solid State, 28 Volt Operated Final Amplifier
Automatic Antenna Tuner, Built-In
Available with the AT-930 Antenna tuner either built-in,
or as an option, which covers the 80-10 meter amateur
bands,
including the new
WARC
bands. The tuning
range
is automatically
pre-set
AT band
selection
to
minimize tuning time. Impedance matching capability is
20 to
150 chms,
unbalanced.
An "AUTO-THRU''
switch is provided on the front panel.
CW Full Break-In
RF Speech Processor
Dual Digitat VFO's