Led Indication - Hitachi Relion SAM600 Commissioning Manual

Section 4
User interface
Table 5:
Name
ESC
Enter
Up
Down
Left
Right
Key
Commands
Table 6:
Name
Menu
Clear
Help
4.3.3

LED indication

The LHMI service kit for SAM600-IO includes three status LEDs above the display: Ready, Start and
Trip.
Table 7:
LED state
Off
On
Flashing
20
Navigation push-buttons
Description
• Leaving setting mode without saving the values.
• Cancelling certain actions.
•
Adjusting the display contrast in combination with
•
Running the display test in combination with
•
Deleting a character in combination with
•
Inserting a space in combination with
• Entering parameter setting mode.
• Confirming a new value of a setting parameter.
• Confirming selection in dialogs and alarm panel.
• Moving up and down in menus.
• Selecting objects in the SLD.
• Moving selection in dialogs and alarm panel.
• Scrolling active digits of a parameter when entering a new setting value.
• Moving left and right in menus.
• Selecting pages in the SLD.
• Changing the active digit of a parameter when entering a new setting value.
• Activating the authorization procedure, when the user is not logged in.
• Logging out, when the user is currently logged in.
Command push-buttons
Ready LED (green)
Description
Auxiliary supply voltage is disconnected.
Normal operation.
Internal fault has occurred.
© 2017 - 2023 Hitachi Energy. All rights reserved
or .
.
when editing a string.
when editing a string.
Description
• Moving directly to Main menu, if currently in
any other menu or view.
• Moving to the default view, if currently in Main
menu.
• Activating the Clear/Reset view.
Showing the help menu.
GUID-49DF72CC-9F32-4949-B4A9-62AAD20322F8 v2
Switchgear control unit SAM600-IO
1MRK511447-UEN Rev. E
Commissioning manual