Specifications - Makita UH007GD201 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Blade length
Strokes per minute
Overall length
Rated voltage
Net weight
Protection degree
Model:
Blade length
Strokes per minute
Overall length
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear eye protection.
DANGER - Keep hands away from blade.
UH004G
600 mm
2,000 / 3,600 / 5,000 min
1,120 mm
D.C. 36 V - 40 V max
4.3 - 4.9 kg
UH007G
750 mm
2,000 / 3,000 /
-1
4,000 min
1,274 mm
D.C. 36 V - 40 V max
4.6 - 5.2 kg
BL4020* / BL4025* / BL4040* / BL4050F
* : Recommended battery
DC40RA / DC40RB / DC40RC
Only for EU countries
Ni-MH
Due to the presence of hazardous components in the
Li-ion
equipment, waste electrical and electronic equip-
ment, accumulators and batteries may have a nega-
tive impact on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
8 ENGLISH
UH005G
750 mm
-1
2,000 / 3,000 /
4,000 min
1,263 mm 1,123 mm
4.5 - 5.1 kg 4.4 - 5.0 kg
IPX4
UH008G
600 mm
2,000 / 3,600 / 5,000 min
1,120 mm 1,262 mm
4.3 - 4.9 kg 4.4 - 5.0 kg
IPX4
PDC01 / PDC1200
UH006G
600 mm
-1
UH009G
750 mm
-1