Makita UH004G Instruction Manual
Cordless hedge trimmer
Hide thumbs
Also See for UH004G:
- User manual ,
- Instruction manual (125 pages) ,
- Instruction manual (101 pages)
Related Manuals for Makita UH004G
Summary of Contents for Makita UH004G
- Page 1 INSTRUCTION MANUAL Cordless Hedge Trimmer UH004G UH005G UH006G UH007G UH008G UH009G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: UH004G UH005G UH006G Blade length 600 mm 750 mm 600 mm Strokes per minute 2,000 / 3,600 / 5,000 min 2,000 / 3,000 / 4,000 min Overall length 1,120 mm 1,263 mm 1,123 mm Rated voltage D.C. 36 V - 40 V max Net weight 4.3 - 4.9 kg... -
Page 3: Intended Use
The tool is intended for trimming hedges. Noise Applicable standard : EN62841-4-2 Model Sound pressure level Sound power level (dB(A)) Uncertainty K (dB(A)) Uncertainty K (dB(A)) (dB(A)) UH004G UH005G UH006G UH007G UH008G UH009G NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and may be used for comparing one tool with another. NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure. WARNING: Wear ear protection. WARNING: The noise emission during actual use of the power tool can differ from the declared val- ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed. -
Page 4: General Power Tool Safety Warnings
Use personal protective equipment. Always SAFETY WARNINGS wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions General power tool safety warnings will reduce personal injuries. Prevent unintentional starting. Ensure the WARNING: switch is in the off-position before connecting Read all safety warnings, instruc- to power source and/or battery pack, picking tions, illustrations and specifications provided with this up or carrying the tool. Carrying power tools with... -
Page 5: Additional Safety Instructions
Disconnect the plug from the power source Service and/or remove the battery pack, if detachable, Have your power tool serviced by a qualified from the power tool before making any adjust- repair person using only identical replacement ments, changing accessories, or storing power parts. This will ensure that the safety of the power tools. Such preventive safety measures reduce tool is maintained. - Page 6 Electrical and battery safety Never use the tool when under the influence of alcohol, drugs or medication. Avoid dangerous environment. Don't use the Work gloves of stout leather are part of the tool in dump or wet locations or expose it to basic equipment of the tool and must always rain.
- Page 7 Do not short the battery cartridge: CAUTION: Only use genuine Makita batteries. (1) Do not touch the terminals with any con- Use of non-genuine Makita batteries, or batteries that ductive material. have been altered, may result in the battery bursting (2) Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will...
-
Page 8: Functional Description
Indicating the remaining battery FUNCTIONAL capacity DESCRIPTION Press the check button on the battery cartridge to indi- cate the remaining battery capacity. The indicator lamps CAUTION: Always be sure that the tool is light up for a few seconds. switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before... -
Page 9: Overload Protection
Tool / battery protection system Angle setting of the handle The tool is equipped with a tool/battery protection CAUTION: Always make sure that the handle system. This system automatically cuts off power to is locked in the desired position before operation. the motor to extend tool and battery life. The tool will CAUTION: automatically stop during operation if the tool is placed Do not pull down the lever to under one of the following conditions: unlock the handle while pulling the switch trigger. - Page 10 ► 1 . Speed indicator 2. Main power button ► 1 . Main power button For UH004G/UH005G/UH008G/UH009G NOTE: The caution lamp brinks if the switch trigger is pulled under unoperatable conditions. The caution Indicator Mode...
-
Page 11: Electronic Function
Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop the shear blades after releasing the switch trigger, have the tool serviced at Makita Authorized Service Center. • Accidental re-start preventive function Even if you install the battery cartridge while pull- ► 1 . Cover 2. Plate ing the switch trigger, the tool does not start. - Page 12 Remove the rod and the bearing. Align the protrusions on the shear blades vertically at the same position. ► 1 . Rod 2. Bearing ► 1 . Protrusion NOTE: The rod may remain on the cover. Attach the felt pad to the shear blades. Remove 2 bolts, the felt pad and the sleeves, and then remove the shear blades.
- Page 13 10. Insert the protrusion on the shear blades to the 12. Attach the bearing and the rod. small hole on the rod, then align the position of the felt pad with the holes on the tool, and then attach new sleeves.
- Page 14 Install the shear blades again. NOTICE: If the parts other than the shear blades such as the rods are worn out, ask Makita Authorized Service Centers for parts replacement or repairs. Installing or removing the chip...
-
Page 15: Operation
For basic operation, tilt the shear blades toward the OPERATION trimming direction and move it calmly and slowly at the speed rate of 3 to 4 seconds per meter. WARNING: Keep hands away from shear blades. CAUTION: Avoid operating the tool in very hot weather as much as practicable. When operat- ing the tool, be careful of your physical condition. -
Page 16: Maintenance
NOTICE: Dirt and corrosion cause excessive maintenance. blade friction and shorten the operating time per To maintain product SAFETY and RELIABILITY, battery charge. repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Cleaning the tool Clean the tool by wiping off dust with a dry cloth or one dipped in soapy water and wrung out. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. - Page 17 Set the angle of a file to 45° (for UH004G/ Storage UH005G/UH008G/UH009G) or 50° (for UH006G/ UH007G), and grind the upper blade from 3 directions The hook hole in the tool bottom is convenient for hang- with the file. ing the tool from a nail or screw on the wall. Attach the blade cover to the shear blades so that the blades are not exposed. Store the tool out of the reach of children.
-
Page 18: Grease Lubrication
► 1 . Grease vessel 2. Hole ► 1 . Bolt Apply the grease to the tool (Approximately 5 g as a guide). Remove the grease vessel. Tighten the bolt. TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy Motor does not run. Battery cartridge is not installed. Install the battery cartridge. -
Page 19: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. • Shear blade assembly • Shear blade cover •... - Page 20 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885875A222 www.makita.com 20210118...