Electronic Function - Makita UH007GD201 Instruction Manual

CAUTION:
Never put your finger on the
switch when carrying. The tool may start uninten-
tionally and cause injury.
NOTICE:
Do not pull the switch trigger hard with-
out pressing the lock-off lever. This can cause
switch breakage.
Press the main power button to turn on the tool. To turn
off the tool, press and hold the main power button until
the speed indicators go off.
► Fig.5: 1. Main power button
NOTE: The caution lamp brinks if the switch trigger
is pulled under unoperatable conditions. The caution
lamp blinks if you turn on the main power switch while
holding down the lock-off lever and the switch trigger.
NOTE: This tool employs the auto power-off function.
To avoid unintentional start up, the main power switch
will automatically shut down when the switch trigger
is not pulled for a certain period after the main power
switch is turned on.
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided. To start the tool,
depress the lock-off lever, and then press the switch
lever and pull the switch trigger. Release the switch
trigger to stop.
► Fig.6: 1. Switch lever 2. Lock-off lever 3. Switch
trigger
Speed adjusting
You can select the tool speed by tapping the main
power button. Each time you tap the main power button,
the level of speed will change.
► Fig.7: 1. Speed indicator 2. Main power button
For UH004G/UH005G/UH008G/UH009G
Indicator Mode Stroke speed
High 5,000 min
Medium 3,600 min
Low 2,000 min
For UH006G/UH007G
Indicator
Reverse button for debris removal
WARNING:
cannot be removed by the reverse function, switch off
the tool and remove the battery cartridge, and then
remove the entangled branches or debris using tools
such as pliers. Failure to switch off the tool and remove
the battery cartridge may result in serious personal
injury from accidental start-up. Removing the entangled
branches or debris by hand may cause an injury, since
the shear blades may move in reaction to removing them.
This tool has a reverse button to change the direction
of shear blades movement. It is only for removing
branches and debris entangled in the tool.
To reverse the shear blades movement, tap the reverse
button when the shear blades have stopped, then press
the switch lever and pull the switch trigger while press-
ing the lock-off lever. The speed indicators start blink-
ing, and the shear blades move in reverse direction.
To return to regular movement, release the trigger and
wait until the shear blades stop.
► Fig.8: 1. Speed indicator 2. Reverse button
-1
NOTE: If the entangled branches or debris cannot be removed,
release and pull the switch trigger until they are removed.
NOTE: If you tap the reverse button while the shear
blades are still moving, the tool comes to stop and to
-1
be ready for reverse movement.

Electronic function

-1
The tool is equipped with the electronic functions for
easy operation.
• Constant speed control
The speed control function provides the constant
rotation speed regardless of load conditions.
• Electric brake
This tool is equipped with an electric brake. If the
tool consistently fails to quickly stop the shear
blades after releasing the switch trigger, have the
tool serviced at Makita Authorized Service Center.
• Accidental re-start preventive function
Even if you install the battery cartridge while pull-
ing the switch trigger, the tool does not start. To
start the tool, first release the switch trigger, and
then pull the switch trigger.
14 ENGLISH
Mode Stroke speed
High
Medium
Low
If the entangled branches or debris
-1
4,000 min
-1
3,000 min
-1
2,000 min