Flush Mounting Procedure; Figure 9 - Tank-Flange Mounted Transmitter; Figure 10 - Typical Flush And Flange Mounted Installations - Honeywell SmartLine ST 800 User Manual

Figure 9 – Tank-Flange Mounted transmitter

3.4.6 Flush Mounting Procedure

After the transmitter is mounted, the electronics housing can be rotated to the desired
position. For insulated tanks, remove enough insulation to accommodate the mounting sleeve
and/or the flange extension.
Mount the transmitter flanges within the limits Table 4 for the fill fluid in the capillary tubes,
with a tank at one (1) atmosphere.
Figure 10 – Typical Flush and Flange Mounted Installations
ST 800 Pressure Transmitter User's Manual
12 Revision 15