Advertisement
Available languages
Available languages
CAUTION:
Attach only the cord of the battery
to the cord holders. Do not attach the cord of the
adapters or power tool/machine to the cord hold-
ers. Attaching the cord of the adapters or power tool/
machine may invite accident and cause an injury.
Fig.19
Fig.20
Connecting the unit to the tool or machine
1.
Remove the battery from the shoulder harness assembly.
2.
Pull out the cord from either left or right side of the
battery. When pulling out the cord, be sure to set the
cord in the holders as shown in the figure.
1
2
Fig.21
► 1. Cord 2. Holder
You can also pull out the cord downward as shown in the figure.
Fig.22
3.
Attach the battery to the shoulder harness assembly.
4.
Insert the plug of the adapter or power tool/machine
into the socket of the battery all the way so that the arrow
mark on the plug is aligned with that on the socket.
Fig.23
► 1. Plug 2. Socket 3. Arrow mark
12 ENGLISH
3
1
2
Advertisement
