Others Screen (Display Setting) - Fujitsu AIRSTAGE UTY-ASGX Manual

4-14

Others screen (Display setting)

Make display setting for the "Detail" screen and "Operation history" screen.
When the Display setting button is clicked from the Others screen, the following setting menu
is displayed at the bottom of the main menu.
Auto-Refresh Interval (*1)
Set "Detail" screen update interval. This defines not the screen update interval but
interval for checking the existence of updated data. The check will be performed in this
interval and if the data is updated, the screen display will be updated.
Maximum number of Lines per Page (*1)
Defines the maximum number of data that can be displayed in a page of Operation his-
tory screen.
Separation character for CSV
Specifies the separation character among items at CSV file creation.
OK button
Register the data set in
Note *1 Depending on the performance spec. of personal computer used, operation of
this software may become slow. In such case, re-adjust the value set and
check the operation.
11(
, , .
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.