Fujitsu AIRSTAGE UTY-ASGX Manual page 104

4-15 Control screen
Operation of each refrigerant circuit address, indoor unit No. or each R.C. Group can be con-
trolled.
Ref No. selection field
Selects the refrigerant circuit address (The refrigerant circuit address to be registered
can be selected.)
Control objective selection field
When specifying in unit units, select "Unit" and when specifying in R.C. Group units,
select "R.C. Group". (Unit No and R.C. Group cannot be selected simultaneously.)
Multiple units can be selected by pressing "ctrl" key while selecting.
All
Selects all the displayed units (displayed at
(
The indoor units to be controlled are confirmed by pressing the
Returned to selection of the indoor unit to be controlled by pressing the
On/Off selection field
Selects the operating status. (Select from On/OFF/On (Test).)
102
) button
).
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
button.
button.