Table of Contents
Advertisement
5-12-4
Demand∙interval∙setup
Specifies the interval at which the temperature, pressure information, and electrical compo-
nents operating status is specified for each unit in the VRF System. The refresh interval of
the data displayed at the system list, operation history, and unit detail screens is changed
by changing this setting. When the demand interval is set to a small value, the data refresh
interval becomes shorter, but the data may not be received correctly by an error. At this time,
set this interval to a large value.
Interval time input field
Set the demand interval time. (*1)
OK button
Refreshes the demand interval time according to the inputted time.
*1 The currently set time is displayed by default. Only the numerics 1000 to
Note
10000 (ms) can be inputted. When input is incorrect or there is no inputted,
an error message is displayed.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
109
Advertisement
Table of Contents
Troubleshooting
