Page 1 OPERATING mANuAL SERVICE TOOL for VRF System UTY-ASGX Ver. 1.13 CAuTION Please read the LICENSE AGREEMENT in the manual first. PART NO. 9708313016-13...
Page 3 This “SERVICE TOOL for VRF SYSTEM” License Agreement (LICENSE AGREEMENT) is a legal agreement between you and Fujitsu General Limited (FGL) for the use of VRF SERVICE TOOL products designated below, which includes computer software and printed materials, and may include online or electronic documentation (SOFTWARE PRODUCT or SOFTWARE).
Page 4 FGL hereby irrevocably submit to the exclusive jurisdiction of the Tokyo District Court and other higher courts having jurisdiction in Japan for the settlement of disputes arising under or in connection with this LICENSE AGREEMENT. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 5: Table Of Contents
4-2 Web browser starting (menu screen)∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙31 4-3 Environment setting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙31 (-3-1 Display setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 31 (-3-2 Room temperature display setting ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 33 4-4 Re-scanning∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙34 4-5 System Setting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙34 (-(-1 Network Topology Analyzer ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3( Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 6 (-7-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 76 (-7-2 Operating procedure ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 79 (-7-3 Commissioning report generation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 82 5-8 Operation history screen∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙84 (-8-1 Name and function of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8( 5-8-2 Operation history specification ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 90 Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 7 (-16-1 Name and functions of each area ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 116 5-17∙ When∙a∙message∙is∙displayed∙on∙web∙screen∙∙∙∙∙∙∙∙∙∙∙∙ 117 (-17-1 Scanning other units ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 117 (-17-2 Data acquisition application shutdown ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 117 (-17-3 Stopping of Internet Explorer ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 118 6. Troubleshooting∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 121 Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 8: Safety Precautions∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙6
Otherwise, Service Tool might malfunction. For personal com- puter used as Service Tool, refer to the setting manual. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 9: Precautions When Using The Service Tool∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7
Please read and fully understand the Operating Manual. Fujitsu General Limited is not responsible for improper use. Fujitsu General Limited is not responsible if the settings in this software or data used for the controlling are deleted. We request that the customer take responsibility for the admin- istration of the settings and control data.
Page 10: Outline
When an error occurs in the transmission line or in an indoor or outdoor unit in the system, details about the error can be displayed on the error history screen for easy assessment of the conditions for fast troubleshooting and resolution. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 11 User and passes them to the Data acquisition application through the Database. Service Tool (UTY-ASGX) Data Base User Data acquisition applicatio n WEB application Internet Explorer Table Graph Transmission adaptor Unit data VRF System Transmission line Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 12: Data Acquisition Application Starting Flow
Online work Offline work Online site data selection Import file selection Exit Cancel Cancel Program exit Name master database System end System List Display Scanning setting No scanning Mismatched Unit List Scanning Cancel Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 13: Data Acquisition Application Starting (Online) Flow
*1 When the user ID and password input fields are not inputted, an error mes- sage is displayed. When the password and password confirmation input contents are different, an error message is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 14: Login
Cancel button When the button is clicked, the Service Tool ends. *1 When the user ID and password input fields are not inputted, an error mes- Note sage is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 15: Site Data Selection
When the new site name input field is not inputted, an error message is dis- played. Only alpha-numeric characters and spaces may be used for the site name. When a site is not selected, an error message is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 16: Name Master Database File Selection Screen
*1 Files other than CSV files cannot be selected and displayed. Note When selecting “Cancel”, an error is not displayed even if there are units which cannot receive the address information normally. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 17 Enter the model name of the R.B. unit connected to each indoor R.B. Unit Model Name unit using alphanumeric characters, “-” and “#”. If the model name is unknown, keep the cell blank. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 18 Since a CSV file is not created in formats other than “Microsoft® Excel work- book (*.CSV)” at Save as type, it cannot be used at the name master data- base file selection screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 19 Input the start refrigerant circuit address ~ end refrigerant circuit address range. Checked address When this radio button is selected, only addresses confirmed by the address checker are scanned. Address Checker Opens the address checker screen. See par.3-2-7 Address Checker. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 20 But when CSV formatted Name master file (3-2-4) has been already read, the corresponding Name of the unit will be updated. Cancel button When the button is clicked, the online site selection screen is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 21 • When Single-Split Adaptor (UTR-YRDA) is connected within the VRF sys- tem, be sure to check the “Perform System Initialization” when performing scanning in order to recognized the equipment and display correct infor- mation. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 22 Scanning is started and the scanning progress is displayed. Scanning progress display field Displays the progress of scanning. Cancel button When the button is clicked, scanning stops and the program returns to the scanning setting screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 24: Address Checker
Selects the refrigerant system to be displayed. Can be selected only when Ref. No. is selected at Time field Displays the time that has elapsed after the address check is started by clicking Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 25 Service Tool Signal Amplifer   (with filter) Outdoor unit Indoor unit Service Tool Signal Amplifer   (without filter) Outdoor unit Indoor unit Service Tool Signal Amplifer   (with filter) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 26 Address check Start/End button. When not performing an address check, this serves as the Start button, and when performing an address check, this serves as the End button. Close button Closes this window. When performing an address check, this button is disabled. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 27: Data∙Acquisition∙Application∙Starting∙(Offline)∙Flow∙ ∙ ∙∙∙∙∙∙∙∙∙25
Refer to the following chapter for a description of the data storage method. To store data with other product types, refer to the relevant manual. • 4-6 Exiting • 5-13 Others screen (Download) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 28 • Data from VRF V Series (operation data and series) will not be displayed correctly. When the file created by Download screen is imported (compression file- extension:gz), the decompression file of the selection file is created. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 29: Data Acquisition Application Right Click Menu
Error Memory Reader series) Not displayed when offline. Offline data may be read again. Offline switching display Not displayed when online. Version Version information screen is displayed. Exit Exit from the application. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 30: (-1-2 Screen Transition (Online)
System time setting Cancel Manual Setting Name master database Version Cancel Model name writer Save unit data Cancel Central control forced release Scanning setting Error memory reader Program exit Scanning start System End Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 31: Screen Transition (Offline)
* If data currently displayed be displayed first. need to be saved, dialog box System End for saving the files will be displayed first. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 32 Web browser starting (menu screen) This is the initial screen. It displays Service Tool starting and version information. Displays the system list screen. Displays the version information. Note * For details, refer to “(-2 Menu”. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 33 Select the units of capacity of the displayed outdoor unit from “HP” , “kW” or “ton” . However, when the unit different from outdoor unit destination is specified, “ - ” is dis- played and the value may not be displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 34 After changing the display settings, the changes will take effect only from the Web application newly started from the Menu screen. In order for the changes to take effect, re-display the Web application from the Menu Screen (Refer to “(-2 Menu”). Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 35 Web application newly started from the Menu screen. In order for the changes to take effect, re-display the Web application from the Menu Screen (Refer to “(-2 Menu”). For S series, only thermistor value (actual) is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 36: Re-Scanning∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙34
This information is also output to a CSV file. <Type A> <Type B> When this function is used for VR-II series, do not connect this tool between R.B. Note unit and indoor unit to obtain the accurate data. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 37 When Type B is used, the progress bar display shows the 1000 units of the maxi- Note mum number of responding units as 100%. Consequently, check the progress state by considering that the last display position depends on the number of responding units. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 38 White : None / Blue: * / Red: ** / Yellow: *** • The indoor unit, outdoor unit and controller background color are replaced by the following symbols. White: None / Red: ** Close button Closes this screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 39 This list displays the following information, in addition to address. • Read value Displays the value of the item selected by combo box of acquired from the target unit. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 40 Close button Closes this screen (remote setting screen). However, when read/write processing to unit was performed, confirmation dialog box opens to confirm whether to save the data to a CSV file. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 41 Specifies the time to be set. The initial display is the current time. OK button Executes date/time setting using the contents specified at Cancel button Closes this screen. Calendar Arbitrarily selects from a calendar the date to be set. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 42 Go to the unit location and start the unit operation with a remote controller. The units started will be listed in the order they are started on this list and will be numbered in that order. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 43 4-5-5 Model∙Name∙Writer An arbitrary model name can be written to the target unit. (V-II/J-II/J-IIS/VR-II/V-III series) Adaptor selection Selects the transmission adaptor which connects the target unit. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 44 Executes writing of the specified model name to the target unit. Close button Closes this screen. Note The outdoor unit of revision code version A or later corresponds to this function. (V-II Series) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 45 When “All” is selected, nothing is displayed at as shown below. Refrigerant Address selection An arbitrary target refrigerant address can be selected. At this time, the indoor units belonging to the selected refrigerant are displayed at Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 46 Acquires the operation data from the outdoor unit of the selected refrigerant circuit ad- dress and saves it to a CSV file. This data is technical analysis data. Only specified technical staff can handle it. Note Close button Closes this screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 47 For Outdoor Unit (Slave), connect to the Service Service Tool UTY-ASGX Tool on a 1-to-1 basis after changing the setting (DIP Transmission SW3; All OFF) to number Adaptor of Master and Slave 0. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 48: Exiting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙46
Tool without creating an Export file. When exiting the Service Tool, all the unit data other than the system list is deleted. Therefore, when data must be referenced later, save the data by selecting “Save Export file & Exit”. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 49: Offline∙Switching∙Display∙∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙47
“Import file selection” dialog screen is displayed. Here, by selecting any file, the unit data will be displayed offline. Time required to display the data may depend on the data volume. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 50: Model∙Data∙Import∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙48
Each version is checked by the following method: This tool ... Task tray icon right click menu → Version selection Model data ... Refer to ReadmeFirst. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 51: Web Application
Main menu Commissioning Double click Troubleshooting Details Error history System selection System list Error contents selection Error List Error contents Error selection selection * For details, refer to the description of each screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 52 • Time Guard Information is acquired from a unit and the CSV file output. Displays the error contents and corrective action for S, V se- Troubleshooting ries units. Refer “Trouble Shooting” section of Service Manual screen for V-II/J-II/J-IIS/VR-II/V-III series. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 53: Menu∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙51
This is the initial screen. It starts the Service Tool and displays the version information. Service Tool button Starts the Service Tool, and displays the Main screen (system list). About Service Tool button Displays the version information. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 54: Main Menu∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙52
Displays refrigerant circuit where emergency stop is activated. Up to 20 addresses of units currently generating an error can be dis- (ERROR) played, beginning from the newest unit. Shift to the error history screen by double clicking the unit. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 55: System List Screen∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙53
Ref. Displays the refrigerant circuit address Displays the unit No. and master / slave operation for outdoor unit. Unit Shifted to unit detail screen of the selected unit No. by click operation. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 56 Displays the newest receiving time of a transmission packet received by the Service Tool. (12-hour display or 2(-hour display) (*3) Time • For summer time, (S) is displayed. Whether or not network communication is performed normally is made the judgment stan- dard. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 57 Anti-freeze operation Anti-freeze setting Maintenance mode Master indoor unit Operation mode controlled by external unit Operation mode controlled by master indoor unit Emergency stop Energy save operation / Economy operation All operations invalid Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 58 When “Ref No.” is selected, a list of only the refrigerant circuit of the speci- fied range is displayed. Specify the range of the refrigerant circuit you want to display. Select the refrigerant circuit from . The refrigerant circuit currently regis- tered are displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 59 List area Header item Printer setup and printing Click on the print tool icon on the right upper corner of the screen and select “Page Setup...”. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 60 Displays the site name. Adaptor Displays the transmission adaptor name. Ref No. Displays the specified refrigerant circuit range. Current Date Displays the current date. List area List Displays the system list displayed on the screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 61: Detail Screen (Diagram)∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙59
Specifies the indoor unit No. displayed on the schematic. (Up to 3 units can be specified.) The schematic of the specified unit is reflected on the screen by clicking this OK button after the refrigerant circuit address and unit No. were specified. (*1) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 62 When unchecked, demands are sent to the entire system. However, instead of the demand range becoming wide, the data density becomes thin. Set when the system is operating normally and you want to monitor the entire system. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 63 Displays the operating status (ON/OFF) and unit status (Normal/Error). Mode Displays the operating mode. Name Displays the unit name. (*2) Special operation Displays the special operation status using icon. Refer “List of icon for special icon operation” in P7(. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 64 Displays the operating status of the compressor at the graph area. For an in- verter compressor, the operation frequency is also displayed. Special Displays the special operation status at the graph area. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 65 Test (Error): Red Note *1 Only when preset. (Refer to "3-2-4 Name master database file selection screen") The display format depends on the setting at the data acquisition application. (Refer to "(-3 Environment setting") Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 66 The R.B. unit status will only be displayed beside the refrigerant circuit when the system type is heat recovery. Special operation Displays the special operation status using icon. Refer “List of icon for special icon operation in P7(.” Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 67 Service Tool was different from the present version. After upper and lower limit is set, scale for the Y axis will evenly be appor- tioned. Therefore, the scale may slightly be different from the actual value. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 68 The graph line selection screen is displayed by clicking the button. Graph display/hide can be set by checking/unchecking. For the meaning of each item displayed on the graph line selection screen, refer to the later schematic/graph display item. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 69 — (-way valve ( Electrical ex- EEV1 pansion valve Electrical ex- EEV2 — EEV2 pansion valve Electrical ex- EEV3 — EEV3 pansion valve Solenoid valve — — — Solenoid valve — — Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 70 Heat ex- THHO2 — Temp.3 changer outlet temperature 2 Heat ex- THHO3 — Temp.3 changer outlet temperature 3 Receiver low — — Temp.3 level tempera- ture Receiver — — Temp.3 middle level temperature Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 71 Ball valve — — Service port High-pressure — HPSW1 — HPSW1 — switch1 High-pressure — — HPSW2 — — switch2 Low-pressure — — switch Drive Displays drive — Freq. Drive Freq.(rps) frequency (Hz) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 72 Discharge solenoid valve (For R.B. — — unit) Suction solenoid valve (For R.B. — SV(~6 — unit) Bypass 1 solenoid valve (For R.B. — — unit) Bypass 2 solenoid valve (For R.B. — — unit) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 73: Schematic Specification Method
The dates at which there is data are displayed in a list and can be selected. When the date/time was changed and the schematic was displayed, the check mark is removed from “Auto refresh”. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 74: Detail Screen (Status List)∙ ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙72
In this screen, detail data for all the units in the specified refrigerant circuit will be displayed at a certain point of time. Control area Outdoor unit status area Indoor unit status area Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 75 Unchecked: Do not automatically refresh the screen. This will switch to the Diagram screen. Diagram (Refer to "(-( Detail screen (Diagram)") Commissioning Starts the commissioning tool. (Refer to "(-7 Commissioning tool") Mark List Displays the list of abbreviations. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 76 Displays horizontal louver position. For other information, refer to the "(-8-1 Name and function of each area", display item (Indoor unit). *1 For the meaning of the displayed icons, refer, icon list below Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 77 Anti-freeze operation Anti-freeze setting Maintenance mode Master indoor unit Operation mode controlled by external unit Operation mode controlled by master indoor unit Emergency stop Energy save operation / Economy operation All operations invalid Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 78: Commissioning Tool∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙76
If there is even 1 indoor unit currently being operated by control, etc. from another unit, test run commands cannot be executed. Use the Stop button and stop all the units in advance. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 79 Display Status Commissioning log data of the unit of Background color (blue) the currently selected test pattern. No commissioning log data of unit of Background color (gray) the currently selected test pattern Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 80 Stops test running of the relevant refrigerant circuit and returns to the initial Stop display. After run command, enters the unselectable state. For units which performed Unit Button a test run, the button color is displayed in green. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 81 For indoor units, when any button is selected, all the units that belong to the same R.C. group as the selected unit No. also enter the selected state. When the button is clicked in the units selected state, test run is started. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 82 The commissioning log data of the selected units (italic bold characters) is saved by clicking the button. On the screen, the background color of the unit No. that generated the commissioning log data changes to blue. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 83 The commissioning log data can be cleared by clicking the button. When the commissioning log data is cleared, the background color returns to gray. End the commissioning tool by clicking the button. However, units which are test running are not stopped. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 84 System list template (indoor unit) OutTestRunTemp Test run result template (outdoor unit) InTestRunTemp Test run result template (indoor unit) Temporarily saves the CSV data. This sheet is used in report genera- DataSheet tion processing. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 85 When you want to change the displayed sheet, click the sheet heading at the bottom of the screen. (See the following figure.) Since generation is not automatic, the necessary items are inputted manually. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 86: Operation History Screen∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙84
Displays a print window. Displays the CSV save window. Mark List Displays the list of abbreviations. Option Set whether Display item (column) should be displayed or hidden. Outdoor∙unit „ „ Display item Page area Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 87 Displays the outdoor tempera- TH12 ture. (*2) Displays the SCHEX outlet — TH13 — temperature. (*2) Displays shell temperature — TH10 TH11 (Invertor comp.) Displays shell temperature — TH11 — (Constant rate comp.) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 88 1 status. Displays electrical expansion EEV2 — EEV2 valve 2 status. Displays electrical expansion EEV3 — EEV3 valve 3 status. verter Displays drive frequency of — Inverter CMP (rps) inverter comp. (Hz) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 89 Units display is [Mpa] or [psi]. The display format depends on the setting at the data acquisition application. For setting at the data acquisition application, refer to "(-3 Environment setting". Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 90 Displays bypass 1 solenoid valve status. (For R.B. unit) Displays bypass 2 solenoid valve status. (For R.B. unit) — Displays fan volume. — V.T. Louver Displays vertical fan position. — H.Z. Louver Displays horizontal fan position. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 91 Anti-freeze operation Anti-freeze setting Maintenance mode Master indoor unit Operation mode controlled by external unit Operation mode controlled by master indoor unit Emergency stop Energy save operation / Economy operation All operations invalid Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 92: Operation History Specification
[Tool] menu, select [Pop-up Blocker], [Turn Off Pop-up Blocker] • The separation character among items at CSV file creation can be changed arbitrarily. For details, refer to “(-1( Others screen (Display setting)”. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 93 In the Page Setup screen, select the size of the paper as “A3” and the Orientation as “Land- scape” and click “OK”. If other option is selected, the print may not come up as good. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 94 Displays the unit type. Date Displays the date and time of the display list. Max EEV Displays the maximum of the electrical expansion valve of the relevant unit. (*1) Current Date Displays the current date. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 95 Unit No Displays the unit No. Capacity Displays the capacity. (Only for outdoor units) List List Displays the operation history currently being displayed. Note Only indoor unit of S series is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 96 *1 The separation character among items at CSV file creation can be changed Note arbitrarily. For details, refer to “(-1( Others screen (Display setting)”. Only when preset. (Refer to "3-2-4 Name master database file selection screen") Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 97 Clears the error history data of the selected refrigerant circuit by clicking the but- ton. Request button Acquires the current error state of an arbitrarily specified indoor unit or outdoor unit. However, when an error is not generated, nothing is displayed after execution. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 98 Displays only the units with an error history list. Troubleshooting screen (Refer to "(-1( Others screen (Time Guard Informa- tion)") can be displayed by clicking the error contents of the display. However, excluding “TransmissionAdaptor” errors. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 99 In the Page Setup screen, select the size of the paper as “A3” and the Orientation as “Land- scape” and click “OK”. If other option is selected, the print may not come up as good. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 100 Displays the specified refrigerant circuit range. Date Displays the date range of the specified data.) Current Date Displays the current date. List display area List Displays the error history list displayed on the screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 101 Saves the currently displayed error history data to a CSV file. Note • The separation character among items at CSV file creation can be changed arbitrarily. For details, refer to “(-1( Others screen (Display setting)”. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 102 Error History Screen displays errors real-time and the data may be deleted at will. b) This screen displays errors recorded in the indoor / outdoor unit. • Errors in this screen do not have information on dates. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 103 Perform request. Cancel request Note Requesting error of particular unit using this screen may become necessary when immediately after connecting Service Tool to a system and you need the latest error information. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 104 The indoor units to be controlled are confirmed by pressing the button. Returned to selection of the indoor unit to be controlled by pressing the button. On/Off selection field Selects the operating status. (Select from On/OFF/On (Test).) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 105 Cool 18~30°C 6(~88°F 16~30°C 60~88°F Heat V / V-II / J-II / J-IIS / VR-II / V-III 10~30°C (8~88°F When setting the R.C. Prohibition, be sure to release the prohibition after- ward. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 106 CSV file creation (Refer to "(-1( Others screen (Display setting)") Time guard Time guard information is acquired from a unit and the CSV file output. information (Refer to "(-1( Others screen (Time guard information)") Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 107: Others Screen (Setting)∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙115
Shifts to the user registration screen. User change button Shifts to the user change screen. User deletion button Shifts to the user deletion screen. Demand interval setup button Shifts to the demand interval setup screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 108 If there is a difference in the password and password confirmation input con- tents, an error message is displayed. If the same user ID is already registered, an error message is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 109 When the contents input at the new password and new password confirma- tion input fields do not match, an error message is displayed. When the password of the selected user ID is incorrect, an error message is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 110 Deletes the selected user. (*2) *1 When the password input field is not inputted, an error message is displayed. Note When the selected user ID and password do not match, an error message is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 111 *1 The currently set time is displayed by default. Only the numerics 1000 to Note 10000 (ms) can be inputted. When input is incorrect or there is no inputted, an error message is displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 112: Others Screen (Download)
Service Tool Ver. 1.7. When the Download button is clicked from the Others screen, the following setting menu is displayed at the bottom of the main menu. Control area List display area Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 113 Display date of creation of the data files. Display the size (in KB) of the data files created. When creation is in prog- Size ress, display the status of progress. Delete Delete any data file. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 114 [Transmission adaptor name - Ref all or Ref multi *- Period - time] * Ref all … All / Ref multi … Ref.No. • There 3 progress status. • Completed … Only File name (File name will be underlined) Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 115: Data File Download/Deletion
Download Click on the (underlined) file name that you want to download. Delete button Click on the “Delete” button on the same line as the file name that you want to delete. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 116: Others Screen (Display Setting)
Register the data set in Note *1 Depending on the performance spec. of personal computer used, operation of this software may become slow. In such case, re-adjust the value set and check the operation. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 117: Others Screen (Time Guard Information)
Specified the units which acquires this data in refrigerant circuit units. CSV button Outputs the Time Guard data of the indoor units and outdoor units belonging to the refrigerant circuit address selected at Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 118: Troubleshooting Screen
This area will not be displayed for V-II/J-II/J-IIS/VR-II/V-III series. Note When V-II/J-II/J-IIS/VR-II/V-III series is selected, trouble shooting section from service manual will be displayed. This will give you a precise and detailed in- struction on trouble shooting. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 119: When A Message Is Displayed On Web Screen
Message The unit name being scanned is displayed. 5-17-2 Data∙acquisition∙application∙shutdown Displays when the data acquisition application is shut down. All operations are impossible. Start the data acquisition application. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 120 (when operation was stopped while IDA Mode of Detail Screen is ON) When you want to change the target range, switch to the relevant communication adapter after System List is displayed again. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 121 The following message which reports that this operation is executed is displayed 10 minutes before Internet Explorer operation is stopped. However, when Internet Explorer ended after this message was displayed, the screen above is not displayed. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 122: Troubleshooting
There is an abnormality in the master data. Countermeasure The database backed up last time is automatically restored. This software can- not be used until completion of restore processing. Since restore processing takes Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 123 After recovery, check the data. Close all applications and stop unnecessary services of the PC in order to free memory. Add extra memory if possible (refer “3-2 Recommended specs” of Set- ting Manual). Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 124 Model name was not acquired from indoor/outdoor unit (V-II/J-II/J-IIS/VR-II/V-III series). Countermeasure Perform scan again (Refer section 3-2-( Scanning). After scanning, check that the model name is displayed in the System List screen. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Page 125 Also, each application cannot simultaneously share 1 trans- mission adaptor. Can a browser other than Internet Explorer be used? Answer Other browsers cannot be used because they are incompatible. Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.

Fujitsu AIRSTAGE UTY-ASGX Manual

Quick Links

Troubleshooting

Related Manuals for Fujitsu AIRSTAGE UTY-ASGX

Summary of Contents for Fujitsu AIRSTAGE UTY-ASGX

Table of Contents