Master Control selection field
Selects the operating mode. (Select from Cool/Heat.)
Set Temp selection field
Selects the temperature. (*1)
Fan Control selection field
Selects the air flow. (Select from Auto/S-Low/Med/High.)
V. T. Louver
Select the vertical louver position.
H. Z. Louver
Select the horizontal louver position.
OK button
Controls operation according to the specified contents.
Close button
Closes the screen without taking any action.
R.C. Prohibition
Specify that all operation using remote controller will be prohibited. *2
Checked ... Operation prohibited, Unchecked ... Not prohibited.
Note
*1 Displayed in Centigrade or Fahrenheit depending on the data acquisition
application setting.
The settable range depends on the series.
Mode
Cool
Heat
*2
When setting the R.C. Prohibition, be sure to release the prohibition after-
ward.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
Series
All
S
V / V-II / J-II / J-IIS / VR-II / V-III
Centigrade
Fahrenheit
18~30°C
6(~88°F
16~30°C
60~88°F
10~30°C
(8~88°F
103