Configuring The Gateway Initially In Provisioning Mode; Switching Between Offline And Online Modes - Cisco IEC6400 Installation And Configuration Manual

Configuring the Gateway Initially in Provisioning
Mode
You can use IoT OD IW for online cloud configuration or alternatively you can switch to offline mode for
configuring the gateway manually using the CLI or web UI.
•
•
•
•
•
•
•
•
•
•

Switching Between Offline and Online modes

To switch between offline and online mode, follow these steps:
Step 1
Log into the configurator interface, see
The URWB IEC-6400-URWB Configurator window appears.
Switching Between Offline and Online modes, on page 21
Configuring the Gateway Initially in Provisioning Mode, on page 22
Configuring General Settings using GUI, on page 28
Configuring LAN Parameters using CLI, on page 29
Resetting the Gateway to Factory Default using GUI, on page 29
Resetting the Gateway to Factory Default using CLI, on page 29
Rebooting the Gateway using GUI, on page 30
Rebooting the Gateway using CLI, on page 30
Saving and Restoring the Gateway Settings, on page 30
Configuring IoT OD IW Online and Offline Mode using CLI, on page 32
Log into the Gateway Configurator for the First
Cisco IEC6400 Edge Compute Appliance Installation and Configuration Guide, Release 1.0.0
5
C H A P T E R
Time.
21