Generating A Rhythm Report (Manual Recording); Auto Storage And Auto Transmit - GE MAC 600 Operator's Manual

Acquiring an ECG

Generating a Rhythm Report (Manual Recording)

The system allows you to generate Rhythm Reports, which are printed reports only. They will
not have computer-generated interpretation or measurements, and they cannot be stored or
transmitted. Use the following steps to generate a Rhythm Report.
1.
Prepare the patient as described in
2.
Ensure that the patient cable is connected and the system is turned on.
3.
Enter the patient data as described in
NOTE:
4.
Adjust the Speed, Gain, and Filter until the waveforms are configured as desired.
For more information, see
5.
Press the Leads key to scroll through the leads.
6.
Press the Rhythm key to begin printing.
NOTE:
7.
Press the Leads key to print the next 3 leads.
8.
Press the Stop key to stop printing.

Auto Storage and Auto Transmit

The device has the ability to auto save and auto transmit acquired ECGs.
70
In a Rhythm Report only the patient ID is printed.
"ECG Options – Before Acquiring an ECG" on page
If the display shows more than 3 leads, the system will display 3 leads from the group
configured as autorhythm and will begin rhythm printing with those 3 leads.
"Preparing the Patient" on page
"Entering Patient Information" on page
MAC™ 600
55.
64.
65.
2047426-001K