Download Print this page

Care & Cleaning - Breville Toast & Melt BSG540 Instruction Book

Sandwich press
Hide thumbs Also See for Toast & Melt BSG540:

Advertisement

Care & Cleaning
Before cleaning, switch the power off at the
power outlet and then remove the power plug.
Allow your sandwich press to cool before
cleaning. The appliance is easier to clean when
slightly warm.
Always clean your sandwich press after each
use to prevent a build up of baked-on foods.
Wipe cooking plates with a soft cloth. If cooked
on food is not removed by this method reheat
the unit for 1–2 minutes, then brush with a
little oil or melted butter. Allow to stand for five
minutes then wipe with a damp cloth.
NOTE
• The cooking plates are coated with a
non-stick surface, do not use abrasives.
• Do not use spray-on non-stick coatings as
this will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
To store your sandwich press:
1. Switch off at power outlet and unplug power
cord from the wall.
2. Allow the sandwich press to fully cool.
3. Slide the Adjustable Height Control
towards the front handle to the 'LOCK'
position so that the top and bottom cooking
plates are locked together (see Fig 4).
4. Wrap the power cord in the cord storage
area below the appliance (see Fig 5).
5. Store on a flat, dry, level surface.
NOTE
The storage clip should not be used to clamp
down the top plate when sandwiches are in
the sandwich press.
WARNING
Do not immerse any part of the sandwich press
in water or any other liquid.
Fig. 4
Fig.5
9

Advertisement

loading

This manual is also suitable for:

Toast & melt bsg520