Accessory Tray - Husqvarna VIKING Onyx 15 User Manual

Blind Hem Foot D
This foot is used for blind hem stitches. The inner edge of this foot guides the fabric. The right toe of
the foot is designed to ride along the hem edge.
Zipper Foot E
7
This foot can be snapped on either to the right or to the left of the needle.
This makes it easy to sew both sides of the zipper. Move needle position to right or left to sew closer
to zipper teeth orfor covering large cording.
Non-Stick Glide Foot H
7
This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or leather to
keep these materials from sticking to the foot.
Edging Foot J
Used for overcasting and seam/overcasting, with stitches that have a stitch width of 5.0 and 5.5mm.
Stitches form over the pin which prevents puckering at the edge of the fabric.
Quilter's 1/4" Piecing Foot P (model Onyx 25)
This foot is used when piecing quilt blocks. The foot has seam guide marks at 1/4" (6 mm) and 1/8"
(3 mm).

ACCESSORY TRAY

Open the extension table for storing accessories. The accesso-
ry tray features special compartments for presser feet and bob-
bins, plus space for needles and other accessories. Store the
accessories in the tray so that they are easily accessible.
4 – Introduction