Operating Your Machine; Select A Stitch; For Sewing The Grey Stitch Patterns; For Sewing The S1 Or S2 Stitch Patterns - Husqvarna VIKING Onyx 15 User Manual

OPERATING YOUR MACHINE

SELECT A STITCH

A. Reverse sewing lever
B. Stitch width dial (model Onyx 25)
The stitch selector dial is used to select the stitch you want to sew. The dial can be turned to the left or to the right.

For sewing the grey stitch patterns

Turn the Stitch Selector Dial until it clicks in place under the
dot directly above the dial on the machine.
Set the Stitch Length Dial according to the length you want.
It can be set anywhere between 0.5 and 4, with 4 being the
longest setting.
For straight stitch sewing, the Stitch Width Dial (Onyx 25
only) can be set at 0 for the center needle position or 6 for the
left needle position.

For sewing the S1 or S2 stitch patterns

Turn the Stitch Selector Dial until it clicks in place under the
dot directly above the dial on the machine.
Set the Stitch Length Dial so that the S1 or S2 is lined up with
the dot above this dial. This dial must be set at the S1 marking
for the blue stitches or the S2 marking for the grey stitches, or
the stitch pattern will not sew.
Set the Stitch Width Dial (Onyx 25 only) to a wide setting (4-
6). If desired, you can set it to a lower setting, depending on
the look you want.
B
A
C. Stitch length dial
D. Stitch selector dial
OPERATING YOUR MACHINE
Model Onyx 15
C
D
Model Onyx 25
Stitch Width Dial Stitch Length Dial
S1
S2
Stitch Width Dial Stitch Length Dial
Operating Your Machine – 17