Table of Contents
Advertisement
GETTING READY TO SEW
UNPACKING
1. Place the machine on a sturdy, flat surface and remove the packaging.
2. Remove the packing material and the foot control.
3. The machine is delivered with an accessory bag, a power cord and a foot control cord.
4. Wipe the machine, particularly around the needle and stitch plate to remove any soil before sewing.
Note: Your HUSQVARNA VIKING
Tribute
150C sewing machine is adjusted to provide the best stitch result at normal room temperature.
®
™
Extreme hot or cold temperatures can affect the sewn result.
PACKING AWAY AFTER SEWING
1. Press the ON/OFF switch to OFF.
2. Unplug the cord from the wall socket and then from the machine.
3. Unplug the foot control cord from the machine. Wind the foot control cord and place it inside the space on the underside of
the foot control.
4. Check to ensure that all accessories are in the accessory box. Slide the box on to the machine, behind the free arm.
5. Place the foot control in the space above the free arm.
6. Put on the cover.
ACCESSORY TRAY
Store presser feet, bobbins, needles and other accessories in
the accessory tray so that they are easily accessible.
Keep the accessory tray on the machine to provide a larger,
flat work surface.
USING THE FREE ARM
Slide the accessory box to the left when you wish to remove it
and use the free arm.
Use the free arm to facilitate sewing trouser legs and sleeve
hems.
To replace the accessory box, slide it onto the machine until it
fits in place.
Getting Ready to Sew – 11
Advertisement
Table of Contents
