Lenovo ThinkSystem SD650 Manual page 196

Hide thumbs Also See for ThinkSystem SD650:
Table of Contents

Advertisement

3. Retry the export of BMC setting.
4. If the problem persists, contact technical support.
• FQXPMCL0039I: Export bmc settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0040K: Failed import bmc settings.
Severity: Warning
User Action:
1. Ensure BMC version is the same between source and target.
2. Restart BMC via supported method and reboot the system.
3. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
4. Retry the import of BMC setting.
5. If the problem persists, contact technical support.
• FQXPMCL0041I: Import bmc settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMEM0001M: Unable to locate LXPM firmware image
Severity: Error
User Action:
1. Restart BMC via supported method and reboot the system.
2. Reflash the LXPM.
3. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
4. If the problem persists, contact technical support.
• FQXPMEM0002I: LXPM firmware image found. Starting LXPM
Severity: Info
User Action:
Information only; no action is required.
• FQXPMEM0003I: LXPM has exited. Control returned to UEFI
Severity: Info
User Action:
192
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nextscale n12007x585468

Table of Contents