Sharp MX-B402 Operation Manual page 415

(11) [Own Name Select] key
☞
TEMPORARILY CHANGING THE SENDER
INFORMATION (Own Name Select)
(12) [Memory Box] key
☞
SENDING A FAX WHEN ANOTHER MACHINE
POLLS YOUR MACHINE (Polling Memory)
4-96)
* Only MX-B402
The optional business card feeder must be attached and "Business Card Scan Option" must be enabled in the system
settings (administrator).
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special modes menu screen. Touch this key when you
wish to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special modes menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special modes menu
screen.
(page 4-92)
(page
Fax/Special Modes
Erase
Edge
Erase
Side Erase
4-72
(13) [Polling] key
☞
CALLING A FAX MACHINE AND INITIATING
RECEPTION (Polling)
(14) [Original Count] key
☞
CHECKING THE NUMBER OF SCANNED
ORIGINAL SHEETS BEFORE TRANSMISSION
(Original Count) (page 4-86)
(A)
OK
(B)
Cancel OK
(C)
Edge
1/2
(0~1)
inch
FACSIMILE
(page 4-93)
Contents