Making Copies Using The Bypass Tray - Sharp MX-B402 Operation Manual

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
For detailed information on paper that can be loaded in the bypass tray, see
(page 1-27) in "1. BEFORE USING THE MACHINE". For precautions when loading paper in the bypass tray, see
"LOADING PAPER IN THE BYPASS
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Place the original in the automatic document feeder.
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
1
After placing the original, specify the original size.
☞
ORIGINAL SIZES
When placing the originals on the document glass...
After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be
copied black, causing excessive use of toner.
2
Exposure
Auto
3
Copy Ratio Original
100%
TRAY" (page 1-33) in "1. BEFORE USING THE MACHINE".
(page 2-29)
Special Modes
2-Sided Copy
Plain
8½x11
Output
8½x11
1.
5½x8½
2.
File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
Preview
Plain
"IMPORTANT POINTS ABOUT
(page 1-37)
Place paper in the bypass tray.
Insert the paper with print side face down.
When loading paper larger than 8-1/2" x 11" or A4, be sure to
pull out the bypass tray extension. Pull the bypass tray
extension all the way out. If the bypass tray extension is not
pulled all the way out, the size of the loaded paper will not be
correctly displayed.
Touch the [Paper Select] key.
2-38
COPIER
PAPER"
Contents