Sharp MX-B402 Operation Manual page 180

Exposure
Auto
6
Copy Ratio Original
100%
8½x11
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
7
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [START] key.
8
Scanning begins.
Remove the original and place the next original, and then press the [START] key.
9
Repeat this step until all originals have been scanned.
Place next original. Press [Start].
When finished, press [Read-End].
10
To cancel scanning of the original and copying...
Press the [STOP] key (
System Settings (Administrator): Initial Status Settings (2-Sided Copy)
The default 2-sided copy mode can be changed.
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
5½x8½
2.
File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
Preview
Plain
7
Special Modes
2-Sided Copy
Plain
8½ 11
) and then enter the correct number.
Read-End
).
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 2-11)
Set the number of copies (number of
sets) with the numeric keys.
Touch the [Read-End] key.
2-22
COPIER
Contents