Sharp MX-B402 Operation Manual page 112

4
If the cleaner is dirty, remove the cleaner and replace it with a clean one. For the procedure for replacing the cleaner,
see steps 5 through 7. If the cleaner is not dirty, go to step 8.
5
6
Return the removed cleaner to the toner collection container.
7
Make sure that the cleaner is firmly attached to the cleaning tool.
Make sure that the cleaner at the tip of
the cleaning tool is not dirty.
Cleaner
Pull out the replacement cleaner from
the toner collection container.
Remove the dirty cleaner.
Firmly grasp the tool close to where the cleaner is attached.
Use your other hand to press down on the hook that secures
the cleaner and remove the cleaner.
Attach the new cleaner to the cleaning
tool.
Align the cleaner hook with the attachment hole in the cleaning
tool.
Hold the cleaner firmly and push the cleaning tool into the
cleaner.
1-71
BEFORE USING THE MACHINE
Contents