Transmitting A Position Request To Another Vessel - Standard Horizon MATRIX Series Owner's Manual

5. Press the
6. Press the

9.7.2 Transmitting a Position Request to Another Vessel

Position Request using the Individual/Position Directory
1. Press the
appear.
2. R o t a t e t h e C H k n o b t o s e l e c t " P O S
REQUEST ", then press the
3. Rotate the CH knob to select a name that
was stored in the individual/position direc-
tory.
Press the
vidual other than those on the display.
4. Press the
soft key to transmit the position
request DSC call.
5. When the GX2000/GX2150 receives the
position from the polled vessel it is shown
on the radio display and also transferred to
a GPS chart plotter with NMEA DSC and
DSE sentences.
6. Press the
If the GX2000/GX2150 does not receive a position data from the
polled vessel, the display will show "NO POSITION DATA."
Position Request by Manually Entering an MMSI
This feature allows you to request the position of a vessel by manually enter-
ing the MMSI of the ship you want to ask the position.
1. Press the
appear.
2. R o t a t e t h e C H k n o b t o s e l e c t " P O S
REQUEST ", then press the
3. Press the
Page 70
soft key to store the selected setting.
soft key two times to return to radio operation.
key. The " DSC Menu " will
CALL
MENU
soft key to select an indi-
soft key, then press the
soft key to return to radio operation.
key. The " DSC Menu " will
CALL
MENU
soft key.
soft key.
NOTE
soft key.
GX2000/GX2150