8.13 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 4-code voice scram-
bler (VS) can be installed in the transceiver. Contact your Dealer to have
a CVS2500 installed. Refer to the section "11.9 SCRAMBLER SETUP" to
program the voice scrambler.
1. Select a channel that was programmed for
scrambler mode (" Vs " and scrambler number will
appear on the display).
2. Monitor the channel before transmitting.
3. Transmit the voice message. The signal sent will be scrambled.
GX2000/GX2150
08
Page 45