Adjusting Blade Speed; Making Standard Scroll Cuts - Grizzly G0938 Owner's Manual

Adjusting
Blade Speed
Use the variable-speed knob shown in Figure 27
to adjust blade speed between 450–1500 SPM
(strokes per minute).
To reduce the risk of injury from unexpected fast
speed at startup, always rotate the variable-speed
knob all the way counterclockwise when starting/
stopping the scroll saw.
Figure 27. Location of variable-speed knob.
Model G0938 (Mfd. Since 03/21)
For standard scroll cutting, follow the pattern
line on the workpiece by pushing and turning the
workpiece at the same time, which allows the kerf
of the cut to make way for the turn.
DO NOT turn the workpiece without pushing it
through the blade at same time; otherwise, the
blade could twist and break.
See Figures 28–31 for examples of standard
Variable- scroll cutting.
Speed Knob
Making Standard
Scroll Cuts
Figure 28. Making a straight cut.
Figure 29. Making a curved cut.
-27-