Makita VR001G Instruction Manual page 12

1
Fig.20
► 1. Outer casing 2. Flexible core shaft
NOTE: The coupling does not reach or fit securely
onto the male thread of the tool, when the top of the
flexible core shaft is not fit into the slot in the vibration
head. To fit them fully, pull the outer casing further
towards the tool while hand-turning the flexible core
shaft.
CAUTION:
Do not force the flexible core shaft
into the outer casing. Do not operate the tool with
the battery to fit the flexible shaft. Such actions
may cause personal injury or damage to the flexible
core shaft.
5.
Knock each of the three corners of triangular
coupling with a hammer a few times in random order to
secure assembly.
Fig.21
Uninstallation
Follow the installation steps in reverse order.
Installing shoulder strap
Optional accessory
from the tool while wearing portable power packs.
Wearing multiple harnesses and straps may impair
the chances to take the equipment off quickly in a
case of emergency and result in personal injury.
the shoulder strap for other purposes, such as
2
the fall prevention at high location. If the parts
for attaching the shoulder strap are used for other
purposes, excessive load may break them and cause
serious injury to the operator and person around/
underneath the operator.
shoulder strap to the tool securely. If the hooks are
attached incompletely, they may come off and cause
injury.
dedicated to this tool. Using other shoulder strap
may cause an injury.
Hang the hooks of the shoulder strap over the hanging
holes on top of the tool.
Fig.22
► 1. Shoulder strap 2. Hook 3. Hanging hole
12 ENGLISH
WARNING:
Always remove the shoulder strap
WARNING:
Do not use the parts for attaching
CAUTION:
Be sure to attach the hooks of the
CAUTION:
Be sure to use the shoulder strap
1
2
3