Application; Setting Guidelines; Logic For Group Alarm Wrncalh; Identification - Hitachi Relion 670 Series Applications Manual

Section 15
Logic
15.3.2

Application

Group alarm logic function ALMCALH is used to route alarm signals to different LEDs and/or output
contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm signal to physical
tripping outputs according to the specific application needs.
15.3.3

Setting guidelines

Operation: Enabled or Disabled
15.4

Logic for group alarm WRNCALH

15.4.1

Identification

Function description
Logic for group warning
15.4.1.1 Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or output contacts
on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the warning signal
to physical tripping outputs according to the specific application needs.
15.4.1.2 Setting guidelines
Operation Enabled or Disabled
15.5

Logic for group indication INDCALH

15.5.1 Identification
Function description
Logic for group indication
15.5.1.1 Application
Group indication logic function INDCALH is used to route indication signals to different LEDs and/or
output contacts on the IED.
216
IEC 61850
identification
WRNCALH
IEC 61850
identification
INDCALH
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Phasor measurement unit RES670
1MRK511407-UUS Rev. N
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
Application manual