Makita LS0816F Instruction Manual page 13

When tilting the carriage to the left 47°
2
Fig.21
► 1. Lever 2. Handle 3. Releasing button
Switch action
WARNING:
Before plugging in the tool,
always check to see that the switch trigger actu-
ates properly and returns to the "OFF" position
when released. Do not pull the switch trigger hard
without pressing in the lock-off button. This can
cause switch breakage. Operating a tool with a
switch that does not actuate properly can lead to loss
of control and serious personal injury.
WARNING:
NEVER use tool without a fully
operative switch trigger. Any tool with an inoper-
ative switch is HIGHLY DANGEROUS and must be
repaired before further usage or serious personal
injury may occur.
WARNING:
NEVER defeat the lock-off button
by taping down or some other means. A switch with
a negated lock-off button may result in unintentional
operation and serious personal injury.
WARNING:
NEVER use the tool if it runs when
you simply pull the switch trigger without press-
ing the lock-off button. A switch in need of repair
may result in unintentional operation and serious
personal injury. Return tool to a Makita service center
for proper repairs BEFORE further usage.
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided. To start the tool,
press in the lock-off button and pull the switch trigger.
Release the switch trigger to stop.
A hole is provided in the switch trigger for insertion of a
padlock to lock the tool off.
Fig.22
► 1. Switch trigger 2. Lock-off button 3. Hole for
1 3
cable any smaller than 6.35 mm (1/4") in diameter.
A smaller shank or cable may not properly lock the
tool in the off position and unintentional operation
may occur resulting in serious personal injury.
Casting a cutting line
wash the lamp in water or use it in a rain or a wet
area. Such a conduct can cause an electric shock
and fume.
as it is very hot while it is lighted or shortly after it
is turned off. This may cause burns.
which may cause damage or shortened service
time to it.
source of light directly.
13 ENGLISH
2
padlock
WARNING:
Do not use a lock with a shank or
CAUTION:
The lamp is not a rainproof. Do not
CAUTION:
Do not touch the lens of the lamp
CAUTION:
Do not apply impact to the lamp,
CAUTION:
Do not look in the light or see the
3 1