Timer Recording; Settings For Timer Recording - Sony HSR-X200 Operating Instructions Manual

Timer Recording

You can set the HSR-X200/X200P to perform
recording during a specified time every day or on a
specified day of the week.
Up to eight sets of timer recording can be specified
On the days specified as holidays with HOLIDAY
SET, timer recording will be made with the same
conditions as those set for Sunday.
In timer recording, data will be recorded in the normal
recording area with the same picture quality as
selected for normal recording.
Before you activate timer recording
Be sure that the built-in clock has been correctly set.
Clock setting can be achieved with LANGUAGE/
CLOCK SET of MAIN MENU 1

Settings for Timer Recording

The day of the week and starting/ending times are to
be specified to activate timer recording.
Use TIMER SET of MAIN MENU 1.
<TIMER SET>
WEEK START STOP REC CYCLE
SUN --:-- --:-- --
MON 08:00 18:00 A 0.05 SEC( 14H) ON
THE 08:00 18:00 A 0.10 SEC( 27H) ON
WED 08:00 18:00 0.20 SEC( 54H) ON
THU 08:00 18:00 A 0.07 SEC( 18H) ON
FRI 08:00 18:00 30 SEC(9999H) OFF
SAT --:-- --:-- --
DLY --:-- --:-- --
START: Set the time to start recording (hours and
minutes in sequence).
STOP: Set the time to stop recording (hours and
minutes in sequence).
REC CYCLE: Select the recording cycle.
SET: To activate timer recording specified on this
line, set to ON.
..........................................................................................................................................................................................................
1) If the specified time for recording overlaps with those on
other lines, recording will be made with the following
priority for the overlapped parts:
1. Recording set for SUN
2. Recording over midnight
3. Recording set for a certain day of the week (MON to
SAT)
28
(GB)
1)
.
(page 49(GB))
SET
SEC(----H) OFF
SEC(----H) OFF
SEC(----H) OFF
The same picture quality selected for normal recording
is used for timer recording. When you select REC
CYCLE, the possible recording time is automatically
. calculated and displayed in parentheses (max. 9999).
When audio recording is valid, "A" appears before the
REC CYCLE value.
Note
The possible recording time displayed on each line
indicates the value assuming that the entire normal
recording area can be used for the recording specified
on that line. This means that recording is not possible
for the total of the possible recording times displayed
on all the lines.
Application software to calculate the actual total time
is available as an option.
For details on the application software, consult your Sony
dealer.
Setting procedure
1
Press the MENU button to display MAIN MENU 1
on the monitor screen.
2
Turn the Jog dial to highlight 6. TIMER SET and
turn the Shuttle dial clockwise.
The TIMER SET display appears.
3
Turn the Jog dial to highlight the line to be set and
turn the Shuttle dial clockwise to finalize your
selection.
The WEEK column of the selected line flashes.
4
Turn the Jog dial to set the day of the week and
turn the Shuttle dial clockwise to register the
setting.
To record with the same condition every day, set to
2)
DLY .
The left field of the START column flashes.
4. Recording set on the lowest two lines of the display
5. Recording set for DLY
2) DLY includes all the days of a week (MON to SUN).