Table of Contents
Advertisement
To install the controller in a rack, follow these steps.
Attach the 19-inch brackets to each side of the controller as shown in
Step 1
screws provided in the kit.
Figure 9
1
RACK MOUNT
1
#10-32 flat head screws (mounting screws for each side of the controller)
After the brackets are attached to the sides of the controller, insert the controller into the 19-inch rack.
Step 2
Use either the 10-32 pan-head screws or the 12-24 slotted head screws to secure the controller in the
rack, as shown in
Attaching the 19-Inch Brackets to the Side of the Controller.
Figure
10.
Cisco 2500 Series Wireless Controller Getting Started Guide
Installing the Controller
Figure 9
with #10-32 flat head
1
17
Advertisement
Table of Contents
