Download Print this page

Sony SU-PF2 Instructions Manual page 8

Floating stand
Hide thumbs Also See for SU-PF2:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Mounting a TV
WARNING
If you allow the mains lead to be pinched under or between pieces of equipment, this may result in a short
circuit or an electric shock.
If you stumble over the mains lead or the connecting cable, the stand may topple over and cause injury.
Decide on the installation location and lay the stand down before installing the TV.
Since the TV is heavy, it is recommended that you decide on the installation location and lay the Floating Stand
down before installing the TV.
Note
Do not push or pull the Floating Stand while it is on the floor. The rubber footings on the base of the Floating
Stand may come off.
1
Hold the TV upright and place it on the Floating Stand so that the dowels
of the pillars fit into the slots of the TV.
Hold the bottom
side of the TV at
the position
approximately up
to 20 cm from the
side to avoid your
hands to
be pinched
between
the TV and
the stand.
8
(GB)
Rear side of the TV
Slots
Dowel

Advertisement

loading