Sony SU-PF2 Instructions Manual page 10

4
Attach the cable cover to the Floating Stand.
1 Pull the cables to take up the slack. Run the cables into the right and left pillars in equal proportions.
2 Place the cable cover for the bottom plate so that the tabs of the cable cover hook into the pillars.
3 Hold the cable cover with both hands. Hook the inside tabs of the cable cover into the pillars, and then,
likewise, the outside tabs, to attach the cable cover.
10
(GB)
Cable cover (for bottom plate)
Tabs
When detaching the
cable cover, push the
cable cover inwards at
the points between the
tabs with both hands.
Cable cover (for pillar)
Hook the inside tabs first.