Table of Contents
Advertisement
installation
10. Place the bottom hole of the upper door onto the
middle hinge pin. Reverse the upper hinge and pin
position. Insert the upper hinge pin into the upper
hole of the upper door. Tighten the pin securely.
Screw the upper hinge tightly.
• Ensure the upper door is aligned
horizontally and vertically, so that the
seals are closed on all sides before finally
tightening the pin.
11. Cover the upper hinge with the upper hinge cover.
Before covering the upper hinge, be sure to
connect electrical connectors.
12. Transfer the door handles to the other side of the
doors accordingly. Remove the 2 door screw hole
covers from the other side of the door and swap
their position with the door handles.
cleaning before use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water
using a sponge or cloth. Wipe completely dry before replacing the drawers. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to
settle.
before using your unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
11
Advertisement
Table of Contents
