Cleaning Before Use; Before Using Your Unit - Kenwood KIL60W18 Installation Instructions Manual

installation
8. Fit the covers at the top of the domed
headed nuts.
9. Insert the washers, if the thickness of the
aesthetic door is between 15-18mm.
10. Open the fridge door and screw the
bottom of the aesthetic door to the
lower connecting block. Remember to
drill the holes Ø2.8 mm to a depth of
10 mm.

cleaning before use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water
using a sponge or cloth. Wipe completely dry before replacing the drawers. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to
settle.

before using your unit

Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
Cover
Fridge Door
Washer
Fridge Door
Ø2.8 mm
10mm
screw
Washer
Aesthetic
Door
Aesthetic
Door
11