Table of Contents
Advertisement
LAN unit
You can connect your computer to 100 Base-TX/10 Base-T LAN (Local Area
Network). To activate the LAN unit on your computer, perform the following steps.
Never insert any cables, but a LAN cable, which have different electric
characteristics from those of the LAN cable. Otherwise, the LAN unit and
the cables may be damaged.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 when connecting to 100 BASE-TX LAN.
Connect Your Computer to LAN
1.
Turn off your computer.
2.
Remove the cover of the LAN jack on the rear side of your computer.
5
3.
Connect an end of the LAN cable into the LAN jack (with
connect the other end of the LAN cable into the network hub.
5-4
LAN Jack
LAN Jack
LAN Cable (Straight Cable)
mark) and
To Network Hub
Advertisement
Table of Contents
