Table of Contents
Advertisement
Setting Up Windows
To set up Windows, follow the instructions on the screen. See also the Windows
quick start guide. It takes approximately 5-10 minutes to complete the entire setup
process. The steps in the setup process are as follows:
1
•
Configuring your location, language and keyboard type
•
Configuring your time zone
•
Accepting license agreement
•
Naming your computer
•
Creating an account
•
Completing configuration
• Do not turn off your computer until completing the Windows setup. If
• Be sure to connect your computer to AC power source. An
• Do not connect any peripheral devices to your computer until the
• If the display turns off, some power management may function. In this
• If you cannot operate the keyboard or the glide pad, press the power
After completing the Windows setup:
•
Confirm Time Zone is correctly selected and set the date and time by double-
clicking the time appearing on the right of the taskbar to open Date and Time
Properties dialog box.
•
Press Fn+F1 (
communication.
1-4
you turn it off, you may not be able to setup Windows later.
undercharged battery may not be able to complete the Windows setup.
Windows setup is completed. Otherwise your computer may
malfunction.
case, press any key to resume your computer from the power
management. (Refer to Power Management section of Chapter 3.)
button for more than four seconds to turn off your computer. Be sure
that the power indicator turns off; then, after more than 10 seconds,
press the power button to turn on your computer again.
) keys to activate the integrated antennas for Wireless LAN
Advertisement
Table of Contents
