Table of Contents
Advertisement
Power Management
Power management saves electricity and extends battery life by controlling power
supply to built-in devices. You can set the following power management properties on
Windows.
•
Stopping power supply to the hard disk
•
Stopping power supply to the display
•
Using System standby/System hibernate
To open Power Options Properties dialog box, click start – Control Panel, and click
Performance and Maintenance; then, Power Options. If Classic view is selected,
3
double-click Power Options icon.
Note that the power management may not seem to function when you are
using an application program that accesses the hard disk periodically.
Stopping Power Supply to Hard Disk
1.
In the Power Options Properties dialog box, select Power Schemes tab.
2.
Set Turn off hard disks to an appropriate value, and click OK.
3.
Close the Control Panel window.
Stopping Power Supply to Display
This procedure is also effective for a connected external monitor complying
with power management.
1.
In the Power Options Properties dialog box, select Power Schemes tab.
2.
Set Turn off monitor to an appropriate value, and click OK.
3.
Close the Control Panel window.
Using System Standby/Hibernate
System standby/hibernate is a very useful power management tool. For example, you
can restart your computer from stand by mode more quickly than shut down mode.
When your computer resumes from System standby/hibernate, the system restores the
exact last state of your computer. On Windows, you can set the conditions under
which the system enters System standby or System hibernate.
3-6
Advertisement
Table of Contents
