Set Up A Guest Wifi Network - NETGEAR 8NE10325070 User Manual

- WPA [TKIP] +WPA2 [AES]: This type of security enables WiFi devices that
support either WPA or WPA2 to join the router's WiFi network. This is the
default mode.
• RADIUS server IP Address: Enter the IPv4 address of the RADIUS server to which
the WiFi network can connect.
• RADIUS server Port: Enter the number of the port on the router that is used to
access the RADIUS server for authentication. The default port number is 1812.
• RADIUS server Shared Secret: Enter the shared secret (RADIUS password) that
is used between the router and the RADIUS server during authentication of a
WiFi user.
7. Click the Apply button.
Your settings are saved.

Set up a guest WiFi network

A guest WiFi network allows visitors to use the Internet without using your WiFi security
password or with a different WiFi password. By default, the guest WiFi network is
disabled. You can enable and configure the guest WiFi network for each WiFi band.
The WiFi mode of the guest WiFi network depends on the WiFi mode of the main WiFi
network. For example, if you configure the WiFi mode for the main WiFi network as Up
to 54 Mbps in the 2.4 GHz band, the guest WiFi network also functions in the Up to
54 Mbps mode in the 2.4 GHz band. The channel also depends on the channel selection
of the main WiFi network.
The router provides two default guest WiFi networks with the following names (SSIDs):
• 2.4 GHz guest WiFi network SSID: NETGEAR-Guest
• 5 GHz guest WiFi network SSID: NETGEAR-5G-Guest
By default, these networks are configured as open networks without security but are
disabled. You can enable one or both guest networks. You can also change the SSIDs
for these networks.
To set up a guest WiFi network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
Manage Network Settings
4-Stream AX1800 WiFi 6 Router Model RAX10
71 User Manual