Picture/Backlight Adjustments - Sharp VL-ME10E Operating Manual

Appendix
Appendix
Picture/Backlight Adjust-
ments
Available modes: all modes
If the picture on the screen is difficult to see
due to ambient lighting or other factors, adjust
the screen picture settings.
Adjusting the screen picture
1
Press the MENU/DISPLAY button until
the menu screen appears.
2
Press f or d to select O (1), then
press SET (2).
L CD VF SE T
SET
a s
1 1 2
a
3
Press f or d to select the item you
wish to adjust, then press SET.
LCD BRIGHT: Adjusts the brightness of
the picture on the LCD monitor.
LCD COLOUR: Adjusts the colour density
of the picture on the LCD monitor.
VF BRIGHT: Adjusts the brightness of the
picture in the viewfinder.
4
Press f or d to adjust the item to the
desired setting and then press SET.
LCD BR I GHT
Darker
LCD COLOUR
Decrease
VF BR I GHT
Darker
Note:
• Close the LCD monitor to turn on the
viewfinder when adjusting the "VF BRIGHT"
by using the CONTROL dial (See page 30).
89
All manuals and user guides at all-guides.com
BACKL I GHT AUTO
L CD BR I GHT
L CD COL OUR
VF BR I GHT
RETURN
SET
s
Brighter
Increase
Brighter
5
Press the MENU/DISPLAY button to
turn off the menu screen.
Adjusting the Backlight
1
Press the MENU/DISPLAY button until
the menu screen appears.
2
Select O, then press SET. Press f or
d to select "BACKLIGHT" (1), then
press SET (2).
L CD VF SE T
BACKL I GHT
L CD BR I GHT
SET L CD COLOUR
a s
VF
RETURN
1 1 2
a
3
Press f or d to select "AUTO",
"NORMAL" or "BRIGHT", then press
SET.
BACKL I GHT
AUTO: The camcorder automatically
switches between "NORMAL" and
"BRIGHT" depending on the ambient
lighting. This mode is only available in
TAPE-CAMERA, DUAL-CAMERA or
CARD-CAMERA mode.
NORMAL: For use indoors or under
moderate lighting conditions.
BRIGHT: For use outdoors under strong
lighting conditions, such as bright
daylight.
4
Press the MENU/DISPLAY button to
turn off the menu screen.
Note:
• When the LCD COLOUR is adjusted, the picture
on the LCD monitor may differ from the picture
actually recorded. Do not change the colour
setting unless it is necessary. (This adjustment
only affects the monitor picture, not the recorded
image.)
AUTO
NORMAL
BR I GHT
BR I GHT
SET
s
BR I GHT