Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker BES700
Summary of Contents for Black & Decker BES700
- Page 1 ® BES700 www.blackanddecker.com.au BES710 www.blackanddecker.co.nz...
- Page 7 12 11...
-
Page 8: Intended Use
ENGLISH (Original instructions) Intended use Your BLACK+DECKER BES700, BES710 sliding compound mitre saw has been designed for sawing wood, plastic and nonferrous metal only. This tool is intended for nonprofessional users. Safety instructions General power tool safety warnings Warning! Read all safety warnings, instructions, illustrations and specifications provided with power tool. -
Page 9: Safety Instructions For Mitre Saws
English (Original instructions) (Original instructions) ENGLISH b. Avoid body contact with earthed or grounded 4. Power tool use and care surfaces such as pipes, radiators, ranges and a. Do not force the power tool. Use the correct power tool refrigerators. There is an increased risk of electric shock for your application. -
Page 10: Additional Safety Instructions For Mitre Saws
ENGLISH (Original instructions) keep your hand at least 100 mm from either side of the table, move the saw blade through a complete simulated saw blade. Do not use this saw to cut pieces that are cut to assure there will be no interference or danger of too small to be securely clamped or held by hand. - Page 11 (Original instructions) ENGLISH Never perform any cleaning, maintenance, removal of any technical data. Use only the blades specified in this off-cuts or other parts of the workpiece from the cutting manual, complying with EN 847-1. area when the machine is running and the saw head is not Do not use High Speed Steel (HSS) saw blades.
- Page 12 ENGLISH (Original instructions) Wear a dust mask. Warning! Cutting plastics, sap-coated wood, and other materials may cause melted material to This product is not to be used by children accumulate on the blade tips and the body of the saw blade, under 16.
- Page 13 (Original instructions) ENGLISH 5. Table extension rail Pull the table extension rail (5) to the required length for 6. Bolt holes the workpiece as shown in Figure C. 7. Mitre angle indicator Secure in position by tightening the extension rail locking 8.
-
Page 14: Removing The Blade
ENGLISH (Original instructions) Removing the blade make sure that the sliding fence is secured by the slide fence locking screw (35) firmly. Unplug the saw. Raise the arm to the upper position and push the blade Warning! When performing bevel cuts, slide the sliding fence guard (14) up as far as possible. - Page 15 (Original instructions) ENGLISH Crosscuts Bevel square to table adjustment (Fig. P) A crosscut is made by cutting wood across the grain at any To align the blade square to the table, lock the arm in the angle. A straight crosscut is made with the mitre arm at the down position with the lock down pin.
- Page 16 Cutting base molding up to 70 mm / 90 mm high LEFT SIDE, OUTSIDE CORNER: vertically against the Fence 1. Bottom of molding against fence BES700 - 70 mm for 216 mm 33.9° 2. Mitre table set left 31.6° BES710 - 90 mm for 254 mm 3.
-
Page 17: Troubleshooting
(Original instructions) ENGLISH If you remove the clamp, dust bag, etc., you can carry the Inside Corner Outside Corner tool more easily. Carry the tool by one hand holding the carry handle (22) Left Side Mitre right at 45° Mitre left at 45° and one hand holding the tool base. -
Page 18: Ec Declaration Of Conformity
Black & Decker. Max. depth cut at 90 ° Max. depth cut at 45 ° Patrick Diepenbach BES700 - Level of sound pressure according to EN 62841: General Manager, Benelux (sound pressure) 97.5 dB(A), Uncertainty (K) 3 dB(A) Black and Decker, (sound power) 108.0 dB(A), Uncertainty (K) 3 dB(A) - Page 20 Australia & New Zealand Stanley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia 05/2023 NA335475...