Activating Leds - Hitachi 650 Series Operation Manual

1MRK500128-UEN Rev. H
10.
Press
11.
Confirm the change with
7.4.2

Activating LEDs

To activate the LEDs, they must be configured with PCM600.
1.
Select Main menu /Configuration /HMI /LEDs and press
IEC13000056 V2 EN-US
Figure 48:
The list can contain three alarm groups at the maximum. The amount of groups depends on the
amount of LEDs taken into use.
2.
Select an alarm group with
3.
Select an Alarm LED with
4.
Press
5.
Press
650 series
Operation manual
[0.33]
IEC13000049 V3 EN-US
Figure 47: Changing the setting value
or to change the value.
.
Alarm groups
or
to confirm the selection and to change the Alarm LED mode.
or to change the value and
© 2017 - 2023 Hitachi Energy. All rights reserved
[18.31]
[18.98]
[inches]
IEC13000056-2-en.vsd
or and press .
.
to confirm the selection.
Operating procedures
[0.79]
[7.68]
GUID-C63971C7-EDC8-40BA-B53B-7377AA33FCC5 v6
.
Section 7
61