Table of Contents
Advertisement
•
Prefilter
•
High performance filter
•
HEPA filter
•
Seat nozzle
•
Crevice nozzle
•
Wall mount for cordless cleaner
•
Cyclone unit
•
Cyclone attachment
•
Tool bag
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Cyclone attachment
Optional accessory
1
2
3
Fig.36
► 1 . Release button 2. Hook 3. Extension wand
(Straight pipe) 4. Cyclone attachment 5. Suction
inlet
About the cyclone attachment
Using the cleaner with the cyclone attachment installed
reduces the amount of dust that enters the capsule,
which helps to prevent the suction force from weaken-
ing. In addition, cleaning after use is also simple.
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool. If the
battery cartridge is left inserted, the cleaner may start
unexpectedly and result in injury.
Clean the mesh filter of the
CAUTION:
cyclone attachment and the filters of the cleaner
unit when they become clogged. Continuing use in
the clogged condition may result in heating or smoke.
5
4
NOTICE:
When the cyclone attachment is
attached, do not use the cleaner in a horizontal
or upward facing position. Doing so may cause the
mesh filter to become clogged.
Always use the cleaner with the filters
NOTICE:
installed, even when using the cyclone attach-
ment. Using the cleaner without the filters installed
may result in a motor malfunction.
NOTE: Check that the cyclone attachment, cleaner,
and extension wand (straight pipe) are locked prop-
erly before use.
NOTE: Empty the dust case of the cyclone attachment
and the capsule of the cleaner when dust has accumu-
lated. Continuing use will result in weakened suction force.
NOTE: You can also use the cyclone attachment with-
out lock function.
NOTE: To install or remove the cyclone attachment,
refer to the section "Installing and removing cleaner
attachments".
Disposing of dust
When dust has accumulated up to the full line of the dust
case, follow the procedure below and dispose of the dust.
Hold the dust case firmly, press and hold the two
1.
buttons, and remove the dust case.
2
Fig.37
► 1 . Full line 2. Dust case 3. Button (two locations)
4. Mesh filter
2.
Dispose of the dust inside the dust case and remove
any dust and powder adhered to the surface of the mesh filter.
3.
Insert the dust case all the way until the two but-
tons lock with a click.
2
Fig.38
► 1 . Dust case 2. Button (two locations)
14 ENGLISH
1
4
1
3
Advertisement
Table of Contents
